swanrobotics – SwanRobotics

Levelconverter

In my last article, I wrote about using an MD04 motor driver for my motors. In the example, I used

The first thing to do for my A1 robot is to control the motors. I wanted to use MD03 motor

My A1 robot is a robot based on a wheelchair. The robot’s purpose was to do telepresence. I built this

Now we are going to put the back covers in place. This is a fairly easy build. Just print all

Finally I made some progress on inMoov robot in a long time. The left arm is completely done already, but

The bicep from the inmoov is not a complex part and are the same for both left and right arm.

After the crash of my inMoov robot it took a lot of work to put it back together. To prevent

Wow. Time flies when you having fun. This website is about my the things I build in my free time.

A few weeks ago I was printing some new parts for my inMoov robot. It was time to make some

The inMoov will be fitted with a PIR module. This Passive Infrared Sensor measures the infrared light radiates from object