Now we are going to put the back covers in place. This is a fairly easy build. Just print all parts and clean them up. It’s important to put all the mounts in place first. The panels should be glued together on the robot itself because to prevent to much stress on the parts.
On the following picture, the parts are layed out as they should be mounted.
The top part of the back covers should look like this. I used super glue to glue the PLA parts together. Those cheap clamps are usefull to keep everything aligned.
At the end you should see something like this.
If you have questions or comments, please let me know. inMoov is designed by Gaël Langevin so make sure you visit is website at https://inmoov.fr.