Because of a holiday in Turkey I could not print for one week and wasn’t able to share the results with you.
The picture shows a lot of parts. From left to right and from top to bottom:
- robpart3V3
- robpart4V3
- lowarmsideV1_square
- rotawrist3V2
- rotawrist2 (black part)
- PivPotholderV21b (two black parts)
- rotawrist1V3
- cableholderwristV4
- WristGearsV4 (3 gears)
- PivPotentioV3 (4 black parts)
- servo-pulleyX5
I did redo the lowarmsideV1, PivPotentioV3 and the PivPotholderV21 because I used the original one at frist and used a Dremel to make it fit. The potentiometers fit great is this new design so I made four of them.
Be sure you check the website from Gael Langevin at www.inmoov.fr.